IMM and IMM2 Support on IBM System x and BladeCenter Servers IMM and IMM2 Support on IBM System x and BladeCenter Servers –

IMM and IMM2 Support on IBM System x and BladeCenter Servers

Abstract

This document lists which Lenovo® System x® and BladeCenter® servers support the Integrated Management Module (IMM) and Integrated Management Module II (IMM2) service processors.

The IMM and IMM2 consolidate service processor functionality previously provided by the combination of the Baseboard Management Controller (BMC) and the Remote Supervisor Adapter II in System x and BladeCenter products.

Changes in the August 24 update:
* IMM Basic supports remote firmware updating and remote configuration through ASU
* Updated the supported servers table
* Updated ServerProven URLs

Introduction


This document lists which Lenovo® System x® and BladeCenter® servers support the Integrated Management Module (IMM) and Integrated Management Module II (IMM2) service processors. The IMM and IMM2 consolidate service processor functionality previously provided by the combination of the Baseboard Management Controller (BMC) and the Remote Supervisor Adapter II in System x and BladeCenter products.
 

Did you know?

System x servers include either the Integrated Management Module II (newer systems) or the Integrated Management Module (older systems).

Integrated Management Module II support

Integrated Management Module II (IMM2) is the second-generation management module integrated on System x servers. IMM2 will offer three levels of functionality: Basic, Standard, and Premium. Starting with IMM2, the Virtual Media Key will no longer be used. Upgrading to Standard or Advanced will be performed using a software license key using a procedure named Feature on Demand (FoD).

IMM2 Basic has the following features:

  • Industry-standard interfaces and protocols
  • Intelligent Platform Management Interface (IPMI) Version 2.0
  • Common Information Model (CIM)
  • Advanced Predictive Failure Analysis (PFA) support
  • Continuous health monitoring
  • Choice of a dedicated or shared Ethernet connection
  • Domain Name System (DNS) server support
  • Dynamic Host Configuration Protocol (DHCP) support
  • Embedded Dynamic System Analysis (DSA)
  • LAN over USB for in-band communications to the IMM
  • Serial over LAN
  • Server console serial redirection
  • Remote firmware updating
  • Remote configuration through Advanced Settings Utility (ASU)


Note: IMM2 Basic does not include web browser or remote presence capabilities.

IMM2 Standard (as standard in some servers or as enabled using the Feature on Demand software license key in other servers) has the following features:

  • Secure web server user interface
  • Remote power control
  • Access to server vital product data (VPD)
  • Advanced Predictive Failure Analysis (PFA) support
  • Power Management
  • Automatic notification and alerts
  • Continuous health monitoring and control
  • Choice of a dedicated or shared Ethernet connection
  • Domain Name System (DNS) server support
  • Dynamic Host Configuration Protocol (DHCP) support
  • E-mail alerts
  • Syslog logging support
  • Embedded Dynamic System Analysis (DSA)
  • Enhanced user authority levels
  • LAN over USB for in-band communications to the IMM
  • Event logs that are time stamped, saved on the IMM, and that can be attached to e-mail alerts
  • Support for Industry-standard interfaces and protocols: IPMI V2.0, CIM, and SNMP
  • OS watchdogs
  • Serial over LAN
  • Server console serial redirection
  • User authentication using a secure connection to a Lightweight Directory Access Protocol (LDAP) server


IMM2 Advanced (as enabled using the Feature on Demand software license key) has the following features:

  • Remote presence, including remote control of server via a Java or Active x client
  • Supports up to four concurrent remote users
  • Operating system failure screen capture and display through the web interface
  • Virtual media allowing the attachment of a diskette drive, CD/DVD drive, USB flash drive, or disk image to a server


Note: For servers where only IMM2 Basic is installed (x3100 M4, x3250 M4, nx360 M4), the use of IMM2 Advanced requires IMM2 Standard also be purchased and enabled.

The following table lists the IMM2 service processors that are standard and optional for each System x server. The values in the table have the following meanings:

  • StandardThis level of functionality of IMM2 comes standard with the server.
  • UpgradeThis level of functionality of IMM2 can be purchased as an option and enabled via Feature on Demand using the indicated part number.
  • NoThe server does not support this level of the IMM2 service processor.


Table 1. System x servers with IMM2

System x server IMM2 Basic IMM2 Standard IMM2 Advanced
System x3100 M4 Standard Upgrade, using 90Y3900 Upgrade, using 90Y3901*
System x3250 M4 Standard Upgrade, using 90Y3900 Upgrade, using 90Y3901*
System x3250 M5 Standard Standard Upgrade, using 90Y3901
System x3300 M4 Standard Standard Upgrade, using 90Y3901
System x3500 M4 Standard Standard Upgrade, using 90Y3901
System x3500 M5 Standard Standard Upgrade, using 90Y3901
System x3530 M4 Standard Standard Upgrade, using 90Y3901
System x3550 M4 Standard Standard Upgrade, using 90Y3901
System x3550 M5 Standard Standard Upgrade, using 90Y3901
System x3630 M4 Standard Standard Upgrade, using 90Y3901
System x3650 M4 Standard Standard Upgrade, using 90Y3901
System x3650 M4 BD Standard Standard Upgrade, using 90Y3901
System x3650 M4 HD Standard Standard Upgrade, using 90Y3901
System x3650 M5 Standard Standard Upgrade, using 90Y3901
System x3750 M4 Standard Standard Standard
System x3850 X6 Standard Standard Standard
System x3950 X6 Standard Standard Standard
iDataPlex® dx360 M4 Standard Standard Upgrade, using 90Y3901
NeXtScale nx360 M4 Standard Upgrade, using 90Y3900 Upgrade, using 90Y3901*
NeXtScale nx360 M5 Standard Upgrade, using 90Y3900 Upgrade, using 90Y3901*

* For systems with only IMM2 Basic standard, the IMM2 Advanced upgrade requires IMM2 Standard (90Y3900) also be purchased and enabled.


Integrated Management Module support

In System x servers, the Integrated Management Module (IMM) consolidates the service processor functionality, Super I/O, video controller, and remote presence capabilities in a single chip on the server system board. The IMM consolidates service processor functionality previously provided in the BMC and the Remote Supervisor Adapter II in System x and BladeCenter products. 

Lenovo offers two levels of IMM, Standard and Premium. If the server has IMM Standard functionality, it can be upgraded to IMM Premium by purchasing and installing a Virtual Media Key (either part number 46C7526 or 46C7527, depending on the server) on the server system board. This key is a physical component (Figure 1). However, no new firmware is required. IMM Premium provides Remote Presence and Virtual Media capabilities. Figure 1 shows where the Virtual Media Key is installed in one of the supported servers (x3620 M3).

Installing the Virtual Media Key in the IBM System x3620 M3
Figure 1. Installing the Virtual Media Key in the System x3620 M3

IMM Standard has the following features:

  • Access to server vital product data (VPD)
  • Advanced Predictive Failure Analysis (PFA) support
  • Automatic notification and alerts
  • Continuous health monitoring and control
  • Choice of a dedicated or shared Ethernet connection
  • Domain Name System (DNS) server support
  • Dynamic Host Configuration Protocol (DHCP) support
  • E-mail alerts
  • Embedded Dynamic System Analysis (DSA)
  • Enhanced user authority levels
  • LAN over USB for in-band communications to the IMM
  • Event logs that are time stamped, saved on the IMM, and that can be attached to e-mail alerts
  • Support for Industry-standard interfaces and protocols: IPMI V2.0, CIM, and SNMP
  • OS watchdogs
  • Remote configuration through Advanced Settings Utility (ASU)
  • Remote firmware updating
  • Remote power control
  • Secure web server user interface
  • Serial over LAN
  • Server console serial redirection
  • User authentication using a secure connection to a Lightweight Directory Access Protocol (LDAP) server


IMM Premium (as enabled using the Virtual Media Key) adds the following features in addition to the features of IMM Standard:

  • Remote presence, including remote control of server
  • Operating system failure screen capture and display through the web interface
  • Virtual media allowing the attachment of a diskette drive, CD/DVD drive, USB flash drive, or disk image to a server


The following table lists the available Virtual Media Keys and their part numbers. Table 3 lists the key used in each System x server. Note that three different part numbers exist. The parts are keyed to prevent insertion into the wrong system.

Table 2. Virtual Media Key part numbers

Part number Description
46C7526 Virtual Media Key
46C7527 Virtual Media Key for Entry Systems
49Y7290 Virtual Media Key for x3100 M3


The following table lists the IMM offerings that are standard and optional for each System x server. The values in the table have the following meanings:

  • Standard: This IMM comes standard with the server.
  • Upgrade: This IMM functionality can be purchased as an option via the Virtual Media Key (VMK) explained using the indicated part number.
  • No: The server does not support this version of the IMM service processor.


Table 3. System x servers with IMM

System x server IMM Standard IMM Premium (VMK) BMC
System x3100 M3 Standard Upgrade, using 49Y7290 No
System x3200 M3 Standard Upgrade, using 46C7527 No
System x3250 M3 Standard Upgrade, using 46C7527 No
System x3400 M2, M3 Standard Upgrade, using 46C7527 No
System x3500 M2, M3 Standard Standard No
System x3550 M2, M3 Standard Upgrade, using 46C7526 No
System x3620 M3 Standard Upgrade, using 46C7527 No
System x3630 M3 Standard Upgrade, using 46C7527 No
System x3650 M2, M3 Standard Upgrade, using 46C7526 No
System x3690 X5 Standard Standard No
System x3755 M3 No No Standard*
System x3850 X5 Standard Standard No
System x3950 X5 Standard Standard No
iDataPlex® dx360 M2 Standard Upgrade, using 46C7527 No
iDataPlex dx360 M3 Standard Upgrade, using 46C7527 No


* The x3755 M3 includes an Aspeed AST-2050 Baseboard Management Controller (BMC). This BMC is different from the BMCs in earlier servers and includes the IMM Premium feature set.

 

BladeCenter servers

The BladeCenter Management Module (MM) and Advanced Management Module (AMM) are the central points of management for the BladeCenter chassis. As such, when the AMM is not responsive, the ability to perform normal management on the chassis is significantly compromised. The AMM is Version 2 of the MM. The main differences are that the AMM is USB based (instead of PS/2) and also has a feature to save service data. The service data collects most of the useful information that is required to support the AMM.

Each BladeCenter chassis, with the exception of the BladeCenter S, supports a redundant pair of management modules. The two management modules used in a chassis must be identical.

The MM/AMM is used to monitor, manage, configure, report logs, and update firmware from BladeCenter chassis blades and I/O modules. Although the IMM is now included in some blade servers, the AMM remains the management module for systems-management functions for BladeCenter and blade servers. There is no external network access to the IMM on blade servers. The AMM must be used for remote management of blade servers. The IMM replaces the functionality of the BMC and the Concurrent Keyboard, Video, and Mouse (cKVM) option card in past blade server products:

  • The Advanced Management Module for BladeCenter S, BladeCenter E, BladeCenter H, and BladeCenter HT is part # 25R5778.
  • The Advanced Management Module for BladeCenter T is part # 32R0835.
  • The original MMs have been withdrawn but were only supported in BladeCenter E (BC-E, part # 48P7055) and BladeCenter T (BC-T, part # 90P3741).


All BladeCenter chassis models with the original MM installed can be upgraded to an AMM. In fact, most current servers require that the chassis have AMMs installed.

The following table lists the service processors that are standard and optional in each BladeCenter chassis.

Table 4. Management models standard in each BladeCenter chassis

BladeCenter chassis Management Module (MM) Advanced Management Module (AMM)
BladeCenter E, machine types 8667, 1881, 7967, 8760 Some models have the MM standard. Some models have the AMM standard.
BladeCenter T, machine types 8267, 8720, 8730 Some models have the MM standard. Some models have the AMM standard.
BladeCenter H, machine types 8852,1886, 7989 No Standard
BladeCenter HT, machine types 8740, 8750 No Standard
BladeCenter S, machine types 8886,1948, 7779 No Standard


The following table lists the service processors that are standard for each of the currently available BladeCenter servers. For older servers, see the Lenovo Press document, Service Processors Supported in System x Servers, available from:
http://lenovopress.com/tips0146 

Table 5. Service processors in BladeCenter servers

Blade Server IMM Standard IMM Premium IMM2 Advanced BMC
HS22 Standard No No No
HS22V Standard No No No
HS23E No No Standard No
HS23 No No Standard No
HX5 Standard No No No
LS22 No No No Standard
LS42 No No No Standard


 

 

Sale

Không sẵn có

Hết hàng